Cara Menyambungkan Bentuk dengan Penyambung dalam .NET

Penghubung dalam Aspose.Slides FOSS adalah bentuk garis yang melekat pada tapak sambungan pada bentuk lain. Apabila anda menggerakkan bentuk yang disambungkan, titik hujung penghubung bergerak bersama dengannya. Jenis penghubung yang paling biasa ialah BentConnector3, yang melintasi halangan dengan satu bengkok siku.

Prasyarat

dotnet add package Aspose.Slides.Foss

Indeks Tapak Sambungan

Setiap bentuk mempunyai empat tapak sambungan bernombor:

Indeks	Kedudukan
`0`	Pusat atas
`1`	Pusat kiri
`2`	Pusat bawah
`3`	Pusat kanan

Sambungkan Dua Bentuk

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

// Add two rectangles
var box1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 50, 200, 200, 100);
var box2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 450, 200, 200, 100);

box1.AddTextFrame("Start");
box2.AddTextFrame("End");

// Add a bent connector (initial bounds are overwritten by the connection)
var conn = slide.Shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);

// Connect right side of box1 (site 3) to left side of box2 (site 1)
conn.StartShapeConnectedTo = box1;
conn.StartShapeConnectionSiteIndex = 3;
conn.EndShapeConnectedTo = box2;
conn.EndShapeConnectionSiteIndex = 1;

prs.Save("connected.pptx", SaveFormat.Pptx);

Batas tempat pemegang (0, 0, 10, 10) yang dihantar kepada AddConnector diabaikan setelah titik akhir sambungan ditetapkan; PowerPoint mengalihkan semula penyambung ke bentuk yang dilampirkan.

Jenis Penyambung

// Straight line
ShapeType.StraightConnector1

// Single elbow (L-shape)
ShapeType.BentConnector2

// Double elbow (Z-shape): most common
ShapeType.BentConnector3

// Curved connector
ShapeType.CurvedConnector3

Gaya Garis Penyambung

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Drawing;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

var box1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 50, 150, 180, 80);
var box2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 500, 300, 180, 80);

var conn = slide.Shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);
conn.StartShapeConnectedTo = box1;
conn.StartShapeConnectionSiteIndex = 2;   // bottom of box1
conn.EndShapeConnectedTo = box2;
conn.EndShapeConnectionSiteIndex = 0;     // top of box2

// Style: dashed blue line, 2 pt width
var lf = conn.LineFormat;
lf.Width = 2.0;
lf.FillFormat.SolidFillColor.Color = Color.Blue;
lf.DashStyle = LineDashStyle.Dash;

prs.Save("styled-connector.pptx", SaveFormat.Pptx);

Carta Alir dengan Pelbagai Penyambung

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

// Three-step flowchart
var step1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 50, 200, 70);
var step2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 220, 200, 70);
var step3 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 390, 200, 70);

step1.AddTextFrame("Step 1");
step2.AddTextFrame("Step 2");
step3.AddTextFrame("Step 3");

void ConnectVertical(IShapeCollection shapes, IShape topShape, IShape bottomShape)
{
    var c = shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);
    c.StartShapeConnectedTo = topShape;
    c.StartShapeConnectionSiteIndex = 2;   // bottom
    c.EndShapeConnectedTo = bottomShape;
    c.EndShapeConnectionSiteIndex = 0;     // top
}

ConnectVertical(slide.Shapes, step1, step2);
ConnectVertical(slide.Shapes, step2, step3);

prs.Save("flowchart.pptx", SaveFormat.Pptx);

Baca Sifat Penyambung

using Aspose.Slides.Foss;

using var prs = new Presentation("connected.pptx");
foreach (var shape in prs.Slides[0].Shapes)
{
    if (shape is Connector connector)
    {
        var start = connector.StartShapeConnectedTo;
        var end = connector.EndShapeConnectedTo;
        Console.WriteLine($"Connector: {start?.Name ?? "?"} -> {end?.Name ?? "?"}");
    }
}