Aspose.Slides FOSS
.NET
Hur man ansluter former med anslutningslinjer i .NET

Hur man ansluter former med anslutningslinjer i .NET

Kopplingar i Aspose.Slides FOSS är linjeformer som fästs vid connection sites på andra former. När du flyttar en ansluten form, flyttar connector endpoint med den. Den vanligaste connector type är BentConnector3, som går runt hinder med en enkel armbågsböjning.

Förutsättningar 

dotnet add package Aspose.Slides.Foss

Anslutningsplatsindex

Varje form har fyra numrerade anslutningsställen:

IndexPosition
0Övre mitten
1Vänster mitten
2Nedre mitten
3Höger mitten

Anslut två former 

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

// Add two rectangles
var box1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 50, 200, 200, 100);
var box2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 450, 200, 200, 100);

box1.AddTextFrame("Start");
box2.AddTextFrame("End");

// Add a bent connector (initial bounds are overwritten by the connection)
var conn = slide.Shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);

// Connect right side of box1 (site 3) to left side of box2 (site 1)
conn.StartShapeConnectedTo = box1;
conn.StartShapeConnectionSiteIndex = 3;
conn.EndShapeConnectedTo = box2;
conn.EndShapeConnectionSiteIndex = 1;

prs.Save("connected.pptx", SaveFormat.Pptx);

Platshållargränserna (0, 0, 10, 10) som skickas till AddConnector ignoreras när anslutningsändpunkterna har ställts in; PowerPoint omdirigerar anslutningen till de bifogade formerna.

Anslutningstyper 

// Straight line
ShapeType.StraightConnector1

// Single elbow (L-shape)
ShapeType.BentConnector2

// Double elbow (Z-shape): most common
ShapeType.BentConnector3

// Curved connector
ShapeType.CurvedConnector3

Styla anslutningslinjen 

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Drawing;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

var box1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 50, 150, 180, 80);
var box2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 500, 300, 180, 80);

var conn = slide.Shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);
conn.StartShapeConnectedTo = box1;
conn.StartShapeConnectionSiteIndex = 2;   // bottom of box1
conn.EndShapeConnectedTo = box2;
conn.EndShapeConnectionSiteIndex = 0;     // top of box2

// Style: dashed blue line, 2 pt width
var lf = conn.LineFormat;
lf.Width = 2.0;
lf.FillFormat.SolidFillColor.Color = Color.Blue;
lf.DashStyle = LineDashStyle.Dash;

prs.Save("styled-connector.pptx", SaveFormat.Pptx);

Flödesschema med flera anslutningar 

using Aspose.Slides.Foss;
using Aspose.Slides.Foss.Export;

using var prs = new Presentation();
var slide = prs.Slides[0];

// Three-step flowchart
var step1 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 50, 200, 70);
var step2 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 220, 200, 70);
var step3 = slide.Shapes.AddAutoShape(ShapeType.Rectangle, 350, 390, 200, 70);

step1.AddTextFrame("Step 1");
step2.AddTextFrame("Step 2");
step3.AddTextFrame("Step 3");

void ConnectVertical(IShapeCollection shapes, IShape topShape, IShape bottomShape)
{
    var c = shapes.AddConnector(ShapeType.BentConnector3, 0, 0, 10, 10);
    c.StartShapeConnectedTo = topShape;
    c.StartShapeConnectionSiteIndex = 2;   // bottom
    c.EndShapeConnectedTo = bottomShape;
    c.EndShapeConnectionSiteIndex = 0;     // top
}

ConnectVertical(slide.Shapes, step1, step2);
ConnectVertical(slide.Shapes, step2, step3);

prs.Save("flowchart.pptx", SaveFormat.Pptx);

Läs anslutningsegenskaper 

using Aspose.Slides.Foss;

using var prs = new Presentation("connected.pptx");
foreach (var shape in prs.Slides[0].Shapes)
{
    if (shape is Connector connector)
    {
        var start = connector.StartShapeConnectedTo;
        var end = connector.EndShapeConnectedTo;
        Console.WriteLine($"Connector: {start?.Name ?? "?"} -> {end?.Name ?? "?"}");
    }
}

Se även

 Svenska